elements Zinc Free Floor Finish
An environmentally preferable Zinc free floor seal and finish formulated with the most advanced polymer technology. Meets today’s need for a product that contains no zinc or other heavy metals that can be harmful to wastewater treatment systems. This low odor finish has exceptional durability and flexibility and can be maintained with scrub and recoat procedures, spray buffing or high speed burnishing.
PREPARATION: If stripping is necessary, use a high quality stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
FINISHING: Apply 3 or 4 liberal coats of seal and finish using a clean mop. Allow a minimum of 45 minutes drying time between coats. Apply additional coat to obtain desired gloss.
BURNISHING: Dust mop or sweep thoroughly. Clean floor with a neutral floor cleaner diluted according to directions. Burnish using the appropriate pads.
RESTORATION: Dust mop or sweep thoroughly. Dilute restorer according to the manufacturer’s directions and apply to floor with clean mop or auto-scrubber. Allow to dry to a haze and buff out with any type of UHS equipment-propane, battery, or electric.
RECOATING: Dust mop or sweep thoroughly. Deep scrub using a neutral floor cleaner diluted according to directions. Apply 1 or 2 liberal coats of finish using a clean mop.
|pH||8.0 – 9.0|
|Coverage||1800 – 2200 ft2 / gal.|
|Dry / Recoat Time||30 minutes min.|
|Maintenance Schedule||Monthly burnish or spray buff|
|Slip Resistance||0.5 min. by ASTM-D2047|
|Weight per Gallon||8.51 lbs./gal.|
|Freeze/Thaw Stability||3 cycles|
|106014………………..1 x 2.5 Gallon Stackable
106015…………..2 x 2.5 Gallon