UHS Daily Burnishable Finish
A high gloss floor finish specifically designed for daily Ultra High Speed (UHS) burnishing. This metal-interlocked, acrylic-copolymer floor finish has an outstanding response to Ultra High Speed (UHS) burnishing and an unsurpassed “wet look” gloss. It is ideally suited for a wide range of applications in the retail market and other areas where daily Ultra High Speed (UHS) burnishing is done. Easy to apply and will not powder in an ultra high speed maintenance program.
PREPARATION: If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely. If stripping is not necessary; sweep up loose dirt and dust. Clean with a quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
FINISHING: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Four to five coats is ideal initially, depending on the condition of the floor and desired gloss.
BURNISHING: Dust mop or sweep thoroughly. Clean floor with a neutral floor cleaner diluted according to directions. Burnish using the appropriate pads.
RESTORATION: Dust mop or sweep thoroughly. Use restorer according to directions and burnish with any type of UHS equipment- propane, battery, or cord electric, while using appropriate pad.
|pH||8.0 – 9.0|
|Coverage||1800 – 2200 ft2 / gal.|
|Dry / Recoat Time||30 minutes min.|
|Slip Resistance||0.5 min. by ASTM-D2047|
|Weight per Gallon||8.51 lbs./gal.|
|Freeze/Thaw Stability||3 cycles|
|105704………………..2 x 2.5 Gallon
105699………………….5 Gallon pail