Prime Time WC
Waterbased Wood Floor Cleaner
This product is designed to thoroughly clean wood floors without leaving any residue. Excellent for use prior to applying waterbased coatings- as conventional floor cleaners leave a detergent residue that can cause adhesion and wear problems. This waterbased wood floor cleaner is also designed for daily tacking or damp mopping to remove soils and excess mop treatment.
FOR DAILY MAINTENANCE BY TACKING:
Thoroughly vacuum and dust mop floor. Mix Prime Time WC at 1:6 (21 oz. per gallon of water) in a mop bucket. Soak 3 to 4 towels in solution until they are thoroughly wet. Wring towels out thoroughly and place one towel flat on floor. Place push broom in middle of towel, pulling front half of towel over top of the broom, and tack rag the floor. Repeat procedure as towel gets dirty.
FOR DAILY MAINTENANCE BY DAMP MOPPING:
Thoroughly vacuum and dust mop floor. Mix Prime Time WC at 1: 64 (2 oz. per gallon of water) depending on soil load and wet mop the floor. Work small areas and remove solution quickly (within 10 minutes)
with auto scrubber, making sure vacuum and squeegee are picking up the solution. Have a second person spot check and pick up any solution not picked up by the auto scrubber.
FOR CLEANING NEWLY SCREENED FLOORS PRIOR TO FINISHING:
Mix Prime Time WC at 1:6 (21 oz. per gallon of water) in a mop bucket. Soak 3 to 4 towels in solution until they are thoroughly wet. Follow directions above and tack the floor. This procedure must be repeated after each screening. After the final screening, the floor should be tack ragged a second time with fresh solution and clean towels prior to application of the finish. Do not attempt to clean the dirty towel in Prime Time WC solution and reuse – use a clean towel.
|pH||10.5 – 12.0|
|Recommended Dilution||1:6 to 1:64|
|Base||Detergent with solvent|
|Weight per Gallon||8.19 lbs./gal.|
|Freeze/Thaw Stability||Keep from freezing|
|107756………………..2 x 2.5 Gallon
107748………………….5 Gallon pail