Quarry & Hard Tile Cleaner
This product is a special blend of mild organic acids coupled with powerful penetrants designed to remove slippery grease and soapy build-up from quarry tile and concrete floors. It deep cleans by penetrating and re-opening the pores of the floor. When used properly, this product can help prevent slipping while promoting cleanliness in kitchens, meatrooms, deli’s, cafeterias, and anywhere else greasy soiled floors may be a problem. Can be used on quarry tile, concrete, glazed tile, resilient tile and vinyl floors. It will penetrate, clean and brighten tile grouting. DO NOT let product stand on polished marble, wood, aluminum, nylon carpet or painted surfaces. If uncertain, test in a small inconspicuous area before using.
Remove food and equipment from area before using.
Dilute product according to guidelines below:
DAILY CLEANING: Dilute product using 4 oz. per each gallon of water.
HEAVILY SOILED GREASY FLOORS: Pre-wet floor using water and apply full strength
Apply solution directly onto floor and spread with a mop or deck brush (alternatively, solution may be applied with a foaming applicator). Allow product to dwell for 5 minutes and agitate with a brush. Remove solution with squeegee or wet-vac, rinse well, and dry floor with squeegee or wet-vac.
|Recommended Dilution||RTU – 1:16|
|Weight per Gallon||8.77 lbs./gal.|
|Freeze/Thaw Stability||Keep from freezing|
|106382…………………..4 x 1 Gallon
106386………………..2 x 2.5 Gallon
106378………………….5 Gallon pail
|106387………………55 Gallon drum|